HP Designjet 5000 Service Manual - Page 67
Check that the Air Pressurization System Sensor Cable is, Refer to System Error Code ffff ffff - thinks not 42 inches
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
System Error Codes System Error: 0B0001 Problem Description: At power-up, the Printer thinks it is smaller than 42 inches. Corrective Action: Refer to System Error Code ffff ffff 030d0170 or ffff ffff 030d0171. System Error: 0B0002 Problem Description: Bad IDS pressure read. Corrective Action: Try the following: n Check that the cable from the Ink Supply Station (ISS) PCA to the Ink Supply Station is correctly connected. n Check that the Air Pressurization System Sensor Cable is correctly connected and is NOT damaged. n Check all the tubes of the APS and make sure they are NOT pinched or damaged. n Faulty APS. Replace the APS ⇒ Page 8-65. n If the error code continues, replace the Main PCA ⇒ Page 8-79. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 0B0003 Problem Description: ADC0 Internal channels check Failure. Corrective Action: Replace the Main PCA ⇒ Page 8-79. HP DesignJet 5000 Series Printers Service Manual 2-15