HP Designjet 5000 Service Manual - Page 64
Error in Calibrating the APS Sensor., Refer to System Error Code 0A0000.
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
System Error Codes System Error: 0A0000 Problem Description: APS Failure. Corrective Action: Try the following: n Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. n Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. n Check that the Air Tube from the APS is correctly connected to the Tubes System. n Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. n Faulty APS. Replace the APS ⇒ Page 8-65. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 0A0010 Problem Description: APS Failure. Corrective Action: Refer to System Error Code 0A0000. System Error: 0A0020 Problem Description: Error in Calibrating the APS Sensor. Corrective Action: Try the following: n Check the APS Sensor and the valve cables, making sure that they are NOT damaged and connected correctly. n Replace the APS ( ⇒ Page 8-65) or the ISS PCA ( ⇒ Page 8-86). 2-12 HP DesignJet 5000 Series Printers Service Manual