HP Designjet 5000 Service Manual - Page 65

System Error Codes System Error: 0A0030 Problem Description: Problem in Depressurizing Air System. Corrective Action: Try the following: n Check the APS for any signs of Ink. Also inspect ALL Ink Cartridges for any signs of leaking (the bottom valve of the Ink Cartridge will contain ink). n If there is ink leakage, replace ALL Ink Cartridges, the APS ( ⇒ Page 8-65) and the Tubes System ( ⇒ Page 8-25). WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 0A0040 Problem Description: APS Failure. Corrective Action: Try the following: n Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. n Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. n Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. n Faulty APS. Replace the complete APS ⇒ Page 8-65. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. HP DesignJet 5000 Series Printers Service Manual 2-13