HP Designjet 5000 Service Manual - Page 130
Diagnostic Print, For Firmware Version A.02.xx, the Printer DOES NOT print
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Service Tests and Utilities NOTE NOTE Diagnostic Print This Service Utility allows you to print a Diagnostic print that will help you to troubleshoot image quality problems and verify printhead nozzle status. 1. In the Service Utilities submenu, scroll to "1.8 Diagnostic Print" and press Enter. 1. Service Utilities 1.3 Altitude Setup 1.4 EEROM Setup 1.5 Reset Life Counters 1.6 Backup EEROM 1.7 Img. Quality Warning 1.8 Diagnostic Print Top Back ↑ Make Selection ↓ Enter Press Enter For Firmware Versions earlier than A.02.xx, the Printer will start to print the Diagnostic Print immediately after selecting. For Firmware Version A.02.xx, the Printer DOES NOT print the complete Diagnostic Print. Instead you must select which part of the Diagnostic Print that you need. 2 Use the Arrow keys to select the page that you need and press Enter to print it. 1.8 Diagnostic Print Page 1 Page 2 Page 3 Page 4 Page 5 Top Back ↑ Make Selection ↓ Enter Press Enter n Page 1 - Checks for banding in the Primary Colors. n Page 2 - Checks the Color to Color Alignment. n Page 3 - Check the Bidirectional Alignment. n Page 4 - Check for Vertical Line Straightness. n Page 5 - Performs the Nozzle Test. For information on how to use the Diagnostic Print, refer to "How to Use the Diagnostic Print" on page 6-4. 4-34 HP DesignJet 5000 Series Printers Service Manual