IBM 4846-545 Service Guide - Page 152
Taiwan, recycle, statement, Electrostatic, Discharge, Trademarks
View all IBM 4846-545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
IBM Taiwan Product Service Contact Info: IBM Taiwan Corporation 3F, No 7, Song Ren Road, Taipei Taiwan Telephone: 0800-016-888 Note: Cable ferrites are required to suppress radiated EMI emissions and shall not be removed. Taiwan recycle statement Electrostatic Discharge (ESD) Attention: ESD damage can occur when there is a difference in charge between the part, the product, and the service person. No damage will occur if the service person and the part being installed are at the same charge level. ESD Damage Prevention Anytime a service action involves physical contact with logic cards, modules, back-panel pins, or other ESD sensitive (ESDS) parts, the service person must be connected to an ESD common ground point on the product through the ESD wrist strap and cord. The ESD ground clip can be attached to any frame ground, ground braid, green wire ground, or the round ground prong on the AC power plug. Coax or connector outside shells can also be used. Handling Removed Cards Logic cards removed from a product should be placed in ESD protective containers. No other object should be allowed inside the ESD container with the logic card. Attach tags or reports that must accompany the card to the outside of the container. Trademarks The following are trademarks of International Business Machines Corporation in the United States or other countries, or both: IBM the IBM logo PS/2 SureMark SurePoint SurePOS Wake on LAN Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. Celeron and Intel are trademarks of Intel corporation in the United States, or other countries. 130 Models 545 and 565 Hardware Service Guide