IBM 4846-545 Service Guide - Page 83
Video, adapter, removing, replacing
View all IBM 4846-545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Removing and replacing FRUs Video adapter card- removing and replacing Attention: The dual-video adapter is a static-sensitive device. See "Handling static-sensitive devices" on page 28. 1. Switch OFF the power to the SurePOS 500. Unplug the power cord from the external power source. 2. Remove the back cover as described at "Rear cover removal" on page 30. 3. Remove the power supply. See "Power supply - removing and replacing" on page 45 4. Remove the three screws shown in Figure 37 and remove the video adapter card. Figure 37. Video adapter card removal 5. To replace, reverse these procedures. After installation, run the diagnostics to ensure that the video adapter card operates correctly. See "Using the IBM Diagnostics for POS Systems and Peripherals package" on page 16. Chapter 3. Removing and replacing FRUs for the SurePOS 500 Models 545 and 565 61