IBM 4846-545 Service Guide - Page 65
drive, cables, removing, replacing
View all IBM 4846-545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing and replacing FRUs Hard disk drive cables - removing and replacing 1. Switch OFF the power to the SurePOS 500. Unplug the power cord from the external power source. 2. Tilt back the tablet. 3. Remove the front cover as described at "Front (or HDD) cover removal" on page 29. 4. If present, remove the speaker. See "Speaker - removing and replacing" on page 62. 5. Remove the HDD power connector and data cable connector from the HDD. 6. Cut any cable ties on the cables. 7. Disconnect the power cable and the data cable from the system board. 8. Remove the base plate. See "Base plate - removing and replacing" on page 57. 9. Pull the power cable free from the plastic guide in the frame. 10. To replace, reverse these procedures. Chapter 3. Removing and replacing FRUs for the SurePOS 500 Models 545 and 565 43