IBM 4846-545 Service Guide - Page 40
Power, interruption, during, flash, update, procedure, Repairing
View all IBM 4846-545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Power interruption during flash BIOS update procedure If power is interrupted during the flash BIOS update procedure, the BIOS could become corrupted. Should this event occur, the system boots automatically from a backup copy of BIOS. To repair the corrupt version of BIOS and return to using the normal BIOS, repeat the steps to update the flash BIOS. Repairing the flash BIOS Two separate copies of POST/BIOS are maintained in separate flash modules. Should the primary copy become corrupt, the system automatically runs from the backup copy when rebooted. A POST message indicates when the backup copy is in use. When this happens, it is important to perform a Flash Update, in an attempt to repair the primary copy and preserve the backup functionality. If the primary is permanently damaged, the system runs normally, but without backup capability for the BIOS, and the POST message appears at each boot up. 18 Models 545 and 565 Hardware Service Guide