IBM 4846-545 Service Guide - Page 78
Memory, modules, industry, standards
View all IBM 4846-545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Removing and replacing FRUs Retainer Figure 32. Memory module removal 5. Press the latches away from the module as shown in Figure 32. 6. Touching only the top corners of the module, pull it gently until it is free from the socket. 7. Before inserting a replacement module, note the alignment notch along the bottom of the module and where the module plugs into the slot. cass1eco 8. Carefully align the module in the slot and then press it into the slot until it is secured by the clip. Note: Ensure the memory module is fully seated in the socket and the retainer tabs are fully upright and engaged in the memory module side notches. 9. Replace the I/O tailgate cover. 10. Replace the rear cover. Memory modules and industry standards You should only use memory provided by IBM Retail for use in Models 545 and 565. Although advertised as industry standard, all memory does not work with every product, IBM performs extensive life and reliability testing to insure that memory offered by IBM will operate correctly over all voltage and temperature ranges. 56 Models 545 and 565 Hardware Service Guide