Pioneer AVIC-X850BT Operation Manual - Page 80

Chapter 13 HD Radio™ reception When it is complete, turns off and is displayed. p The song information for up to 50 songs can be stored on this navigation system. Depending on when the song information is stored, information for the previous song or the song after the current song may also be stored. 3 Connect your iPod. The song information is transferred to your iPod. p If the iPod is already connected, every time you touch , the song information will be transferred to your iPod. When the song information is stored on your iPod, disappears. p When transfer of song information is com- pleted, the information stored in the naviga- tion system will be automatically deleted. p If you turn off the navigation system or dis- connect the iPod while transferring song in- formation, the transfer may not successfully complete. p While the navigation system is storing song in- formation, transfer to iPod is not possible. Using advanced functions Tuning in strong frequencies Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals for good reception. 1 Touch on the "Digital Radio" screen. 2 Touch [Local]. 3 Touch [On] to turn local seek tuning on. # If you touch [Off], local seek tuning is turned off. 4 Touch or to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: 1 - 2 - 3 - 4 AM: 1 - 2 p The FM "4" (AM "2") setting allows reception of only the strongest stations, while lower settings let you receive weaker stations. Switching the seek mode You can select the method of seek tuning. 1 Touch on the "Digital Radio" screen. 2 Touch [Seek]. 3 Touch [All] or [HD]. ! All (default): Seeks stations from both analog and digital broadcasting. ! HD: Seeks only from digital broadcasting. p If you select "HD" while [Blending] is set to "Analog", the setting on [Blending] turns to "D/A Auto" automatically. Switching the reception mode If reception of a digital broadcast becomes poor, the tuner automatically switches to the analog broadcast of the same frequency level by default. If you want to avoid frequent automatic switching, change this setting to [Analog]. 1 Touch on the "Digital Radio" screen. 2 Touch [Blending]. 3 Touch [Analog] or [D/A Auto]. ! D/A Auto (default): Automatically switches to the analog broadcast of the same frequency level as the digital broadcast. ! Analog: Receives analog broadcasting only. p If you select "Analog" on this setting while [Seek] is set to "HD", the setting on [Seek] turns to "All" automatically. Operating by hardware buttons Pressing the TRK button You can move the preset channels up or down. Pressing and holding the TRK button You can perform seek tuning. 80 En