Icom IC-7100 Advanced Instructions - Page 119

Previous view 6 FUNCTIONS FOR TRANSMIT Split frequency operation (Continued) DDSplit Lock function The Split Lock function is convenient for changing only the transmit frequency. When the Split Lock function is not used, accidentally releasing XFC (R) while rotating the Dial, changes the receive frequency. The Split Lock function is OFF by default, but can be turned ON in the "SPLIT LOCK" item of the "Function" Set mode. (p. 17-19) • Setting qqPush SET(C) to enter the Set mode. wwTouch the "SPLIT LOCK" item of the "Function" Set mode. Function > SPLIT/DUP > SPLIT LOCK • If the specified item is not displayed, touch [Y] or [Z](D) one or more times to select the page. eeTouch the option to turn ON the function. rrPush SET(C) to exit the Set mode. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) While transmitting with both Split and Split Lock functions ON, rotating the Dial will not change the frequency. • Operation qqWhile Split frequency operation is ON, hold down SPEECH (R) for 1 second to activate the split lock function. • " " appears. wwWhile holding down XFC (R), rotate the Dial to change the transmit frequency. • If you accidentally release XFC (R) while rotating the Dial, the receive frequency does NOT change. 6-10 Push SET Touch "Function" Touch "SPLIT/DUP" Touch "SPLIT LOCK" SPEECH XFC