Icom IC-7100 Advanced Instructions - Page 170

Previous view 9 D-STAR OPERATION DV automatic detection If you receive an FM signal during DV mode operation, the "DV" and "FM" icons alternately blink to indicate the received signal is FM. When the DV Auto Detect function is turned ON, the transceiver automatically selects the FM mode to temporarily monitor the signal. (Default: OFF) • Regardless of this setting, the "DV" and "FM" icons alter- nately blink if you receive an FM signal during DV mode operation. qqPush SET(C) to enter the Set mode. wwTouch the "DV Auto Detect" item of the "DV Set" Set mode. DV Set > DV Auto Detect • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeT ouch "ON." rrPush SET(C) to exit the Set mode. • W hen an FM signal is received in the DV mode, the "DV" and "FM" icons sequentially blink, and the transceiver receives the signal in the FM mode. When digital call sign squelch (DSQL) or digital code squelch (CSQL) is selected, the transceiver does not receive FM signals, even if this function is ON. You can silently wait for calls from others. Touch "DV Set" Touch "DV Auto Detect" Touch "ON" • DV Auto Detect function: OFF The "DV" and "FM" icons sequentially blink, but the audio cannot be heard. • DV Auto Detect function: ON The "DV" and "FM" icons sequentially blink, and the audio can be heard. These icons alternately blink These icons alternately blink The audio cannot be heard. 9-13 Thanks for the nice QSO• • • The audio can be heard.