Icom IC-7100 Advanced Instructions - Page 175
Speech function, To announce the received call sign
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Previous view 9 D-STAR OPERATION Speech function The speech function announces the called station call sign, or the individual or station call sign that is selected from the RX History. It is convenient when you cannot watch the LCD, or you missed the call's audio. This function helps you to know the call sign of the caller station without seeing the LCD. DDTo announce the received call sign The received call sign can be announced. qqPush SET(C) to enter the Set mode. wwTouch the "RX Call Sign SPEECH" item of the "SPEECH" Set mode. SPEECH > RX Call Sign SPEECH • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch the desired item to select "ON (Kerchunk)" or "ON (All)." • ON (Kerchunk): When a DV call is received, and if the call time is short, the calling station's call sign is announced. (Default) • ON (All): When a DV call is received, the calling station's call sign is announced. rrPush SET(C) to exit the Set mode. • W hen a DV call is received, the standby beep sounds, and after approximately 1 second, the call sign is an- nounced. NOTE: • Even if a "/" and a note are after a call sign, they are not announced. • T he announced contents cannot be recorded on the SD card. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Touch "SPEECH" Touch "RX Call Sign SPEECH" Touch "ON (Kerchunk)" or "ON (All)" Example: ON (All) Push SET • When "ON (Kerchunk)" is selected 'JM1ZLK' • T he IC-7100 has other Speech functions: S-Level speech function The S-meter level is announced before the frequency and mode is announced by pushing SPEECH (C). (SET(C) > SPEECH > S-Level SPEECH) Mode speech function The selected operating mode is announced when mode is selected. (SET(C) > SPEECH > MODE SPEECH) • W hen the digital squelch function is used, and if a received signal is not addressed to your call sign, or does not include an unmatched digital code, the calling station's call sign is not announced. • When "ON (All)" is selected 9-18 'Are you listening?' 'JM1ZLK'