Icom IC-7100 Advanced Instructions - Page 148

Previous view 8 D-STAR OPERATION "FROM" (Access repeater) setting DDUsing the Repeater Search function (Continued) 2. Selecting the access repeater from the Near Repeater list qqPush DR (C) to select the DR mode. wwCheck whether or not "FROM" is selected. • If "FROM" is not selected, touch the "FROM" field. eeTouch the "FROM" field. • The "FROM SELECT" screen appears. rrTouch "Near Repeater." • The "NEAR REPEATER" screen appears. • Up to 20 of the nearest repeaters are displayed. ttTouch the repeater as your access repeater, according to the distance from your position to the repeater. • Example: "Hirano" • The transceiver returns to the DR mode screen, and the selected repeater is set in "FROM." "FROM" is selected. Touch "FROM" Touch "Near Repeater" *When the position data accuracy level is set to "Approximate," the direction data is not displayed if the distance to the repeater is under 5 kilometers. (p. 9-36) Shows the call sign of "Hirano." When your station is in Hirano-ku, Osaka-shi. Shows the distance and direction from your position to the repeater* Touch the repeater (Example: Hirano) Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) "Hirano" repeater is selected in "FROM." NOTE: When using the Repeater Search function, be sure to first receive your own position data. • If no repeater is found in a 160 kilometers range, screen 1, as shown to the right, will be displayed. • If the last received position can be used, screen 2, as shown to the right, will be displayed. 8-12 Screen 1 Screen 2