Icom IC-7100 Advanced Instructions - Page 68
Operating CW
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Previous view 4 RECEIVE AND TRANSMIT Operating CW qqSelect the desired frequency band. (p. 3-6) wwOn the Mode selection screen, touch "CW" to select the CW mode. • After the CW mode is selected, touch "CW" again to tog- gle between CW and CW-R modes, if necessary. eeRotate the Dial to tune a desired signal. • The S-meter displays the received signal strength. • The tuning step can be changed on the Tuning step se- lection screen by touching "kHz frequency." (p. 3-9) rrRotate [AF] (L) to adjust the audio to a comfort- able listening level. ttSet the Break-in operation to the semi break-in or full break-in mode. • "BKIN," "F-BKIN" or "OFF (no indication)" appears. While the "M-3" menu is selected, touch [BK-IN](D) once or twice to select the Break-in operation. • BKIN : Semi break-in • F-BKIN : Full break-in • OFF : No break-in (ACC socket connection for TX is necessary, as shown on page 1-17.) If a microphone is connected, its PTT can be used instead of the external TX switch. yyIf the Semi break-in operation is selected at step t, set the Break-in delay. q W hile the "M-3" menu is selected, touch [BK-IN](D) for 1 second to open the Break-in delay adjustment window. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) "CW" or "CW-R" appears Appears w R otate the Dial to adjust the delay time. • The adjustable delay time is between 2.0 and 13.0 dots. uuUse the electric keyer or paddle to key your CW signals. • The TX/RX indicator lights red. • The Po meter indicates transmitted CW output power. iiIf desired, adjust the Key speed or CW pitch. q P ush SPEED/PITCH (C) to open the Key speed/CW pitch adjustment window. w R otate [M-CH] (L) to adjust the Key speed, or [BANK] (L) to the CW pitch. • The adjustable key speed is between 6 and 48 wpm (words per minute). • The adjustable CW pitch is between 300 and 900 Hz. e P ush MENU (C) to close the window. ooStop keying to return to receive. Semi break-in operation is selected Convenient Receive functions • Preamp and attenuator (p. 5-2) • Twin PBT (passband tuning) (p. 5-5) • AGC (auto gain control) (p. 5-3) • Noise blanker (p. 5-8) • Noise reduction (p. 5-9) • Manual Notch filter (p. 5-10) • ¼ function (p. 3-10) • CW pitch control (p. 4-4) Convenient Transmit functions • Break-in function (p. 6-3) • Keying speed setting (p. 4-4) • Memory keyer (p. 4-6) 4-3