Icom IC-7100 Advanced Instructions - Page 259
VFO frequency and a priority channel, When a signal is received on the priority channel
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Previous view 12 SCAN OPERATION VFO frequency and a priority channel Checks the selected priority channel every 5 seconds, while receiving on a VFO frequency. qqTouch the Memory channel number indication once or twice to select the VFO mode. (p. 3-4) wwSet the receive frequency and the operating mode. (p. 3-7, 3-17) eeTouch the Memory channel number indication to select the Memory mode. (p. 3-4) rrRotate [BANK] or [M-CH] (L) to set the priority channel. • M emory channel, Call channel or Program Scan Edge channel can be selected as the priority channel. ttPush QUICK (D) to open the Quick Menu window. yyTouch "PRIO Watch ON" to start the Priority scan. • T he VFO mode is automatically selected, and PRIO appears. • T o cancel the Priority scan, touch "PRIO Watch OFF" in the Quick Menu window. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Select the VFO mode The receive frequency and the operating mode setting NOTE: When the VFO mode is selected, you can normally operate the transceiver; the operating frequency setting, the scanning operation and so on. Select the Memory mode Set the priority channel (Example: A05) [BANK]/ [M-CH] To start the Programmed scan during the Priority scan, touch [SCAN] in the "M-1" (Menu 1) screen, and then touch [PROG]. When a signal is received on the priority channel The Priority channel is automatically selected, and PRIO blinks on the screen. • T he scan pause timer and resume settings are the same as for a normal scan. Priority scan automatically pauses. 12-16 QUICK Touch "PRIO Watch ON" While Priority scanning