Icom IC-7100 Advanced Instructions - Page 364
Send/read the FM TX tone Bass
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 364 highlights
Previous view 20 CONTROL COMMAND Remote jack (CI-V) information DDCommand table (Continued) Cmd. Sub cmd. 1A 05 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0086 0087 0088 0089 0090 0091 0092 0093 0094 0095 Data Description see p. 20-11 Send/read the WIDE SSB TX bandwidth see p. 20-11 Send/read the MID SSB TX band- width see p. 20-11 Send/read the NARROW SSB TX bandwidth 00 to 10 Send/read the AM TX tone (Bass) level (00=-5 to 10=+5) 00 to 10 Send/read the AM TX Tone (Treble) level (00=-5 to 10=+5) 00 to 10 Send/read the FM TX tone (Bass) level (00=-5 to 10=+5) 00 to 10 Send/read the FM TX Tone (Treble) level (00=-5 to 10=+5) 00 to 10 Send/read the DV TX tone (Bass) level (00=-5 to 10=+5) 00 to 10 Send/read the DV TX Tone (Treble) level (00=-5 to 10=+5) 00/01 Send/read the USB audio squelch setting (00=OFF (OPEN), 01=ON) 00/01 Send/read the ACC and USB output setting (00=AF, 01=IF) 0000 to Send/read the ACC and USB AF 0255 output Level (0000=0% to 0255=100%) 0000 to Send/read the ACC and USB IF 0255 output Level (0000=0% to 0255=100%) 0000 to Send/read the ACC modulation 0255 level (0000=0% to 0255=100%) 0000 to Send/read the DATA modulation 0255 level (0000=0% to 0255=100%) 0000 to Send/read the USB modulation 0255 level (0000=0% to 0255=100%) 00 to 03 Send/read the modulation input set- ting in the DATA mode OFF (00=MIC, 01=ACC, 02=MIC,ACC, 03=USB) 00 to 03 Send/read the modulation input set- ting in the DATA mode ON (00=MIC, 01=ACC, 02=MIC,ACC, 03=USB) 00/01 Send/read the external keypad set- ting for VOICE (00=OFF, 01=ON) 00/01 Send/read the external keypad set- ting for Memory KEYER (00=OFF, 01=ON) 00/01 Send/read the external keypad set- ting for RTTY Memory (00=OFF, 01=ON) 00/01 Send/read the CI-V transceive setting (00=OFF, 01=ON) Cmd. Sub cmd. 1A 05 0096 0097 0098 0099 0100 0101 0102 0103 0104 0105 0106 0107 0108 0109 0110 0111 0112 0113 0114 0115 20-7 Data 00 to 02 00 to 03 00/01 00/01 00 to 04 00 to 02 00/01 0000 to 0255 0000 to 0255 0000 to 0255 00/01 00/01 00/01 00 to 02 00/01 00/01 00 to 02 00/01 00/01 00/01 Description Send/read the "USB2" (COM port) function setting (00=OFF, 01=RTTY Decode, 02=DV Data) Send/read the [DATA1] function setting (00=OFF, 01=RTTY Decode, 02=DV Data, 03=GPS) Send/read the GPS output setting (00=OFF, 01=DATA1USB2) Send/read the DV or GPS data transfer speed (00=4800 bps, 01=9600 bps) Send/read the RTTY decode speed (00=300 bps, 01=1200 bps, 02=4800 bps, 03=9600 bps, 04=19200 bps) Send/read the band setting for the [ACC] socket's pin 7 (VSEND usage) (00=OFF, 01=UHF, 02=VHF/UHF) Send/read the 9600bps Mode setting (00=OFF, 01=ON) Send/read the LCD contrast setting (0000=0% to 0255=100%) Send/read the LCD Backlight setting (0000=0% to 0255=100%) Send/read the Key Backlight setting (0000=0% to 0255=100%) Send/read the Meter Peak Hold setting (00=OFF, 01=ON) Send/read the PBT shifting value display setting while rotating [TWIN PBT] (00=OFF, 01=ON) Send/read the IF filter width and shifting value display setting when the IF filter is switched (00=OFF, 01=ON) Send/read the RX Call sign display setting (00=OFF, 01=AUTO, 02=Auto (RX Hold)) Send/read the RX message display setting (00=OFF, 01=ON) Send/read the RX position display setting when the received Auto Reply signal includes the position (00=OFF, 01=ON) Send/read the TX Call sign display setting (00=OFF, 01=Your Call Sign, 02=My Call Sign) Send/read the Scroll Speed setting (00=Slow, 01=Fast) Send/read the VOICE TX Name Display setting (00=OFF, 01=ON) Send/read the KEYER Memory Display setting (00=OFF, 01=ON)