Icom IC-7100 Advanced Instructions - Page 185
Repeater list, Repeater list contents - programming software
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Previous view 9 D-STAR OPERATION Repeater list You can store repeater information for quick and simple communication in up to 900 repeater memory channels (Repeater list) in up to 25 Groups. Programming the repeater list is required for DR mode operation. NOTE: For easy operation, the repeater list is preloaded into your transceiver. However, if the CPU clears all programmed contents (All Reset), the repeater list is also cleared. We recommend that memory data be backed up externally or be saved to a PC using the optional CS-7100 cloning software. About the repeater list: The repeater list can be downloaded from the Icom website. http://www.icom.co.jp/world/support/download/firm/ index.html DDRepeater list contents The following contents are included in the repeater list: • NAME (Repeater name) (p. 9-30) • SUB NAME (Repeater sub name) (p. 9-31) • CALL SIGN (Repeater call sign and port letter) (p. 9-32) • GW CALL SIGN (Gateway repeater's call sign and port "G") (p. 9-33) • GROUP (Repeater group) (p. 9-33) • USE(FROM) (Access repeater use) (p. 9-34) • FREQUENCY (Access repeater's input frequency)* (p. 9-34) • DUP (Duplex direction)* (p. 9-35) • OFFSET FREQ (Frequency offset)* (p. 9-35) • POSITION (Position data accuracy level) (p. 9-36) • LATITUDE (Latitude position of the repeater) (p. 9-36) • LONGITUDE (Longitude position of the repeater) (p. 9-36) • UTC OFFSET (UTC Offset) (p. 9-37) * Appears only when USE(FROM) is selected as YES. Example: "Hirano" repeater information 9-28