Icom IC-7100 Advanced Instructions - Page 143
Capturing a call sign, Hold down [PTT] to transmit
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Previous view 8 D-STAR OPERATION Capturing a call sign After you receive the repeater's signal, the calling station's call sign can be captured by holding down the Call Sign Capture key AUTO TUNE RX�CS (R). Then you can quickly and easily reply to the received call. 1. Set the received call sign to the destination Hold down AUTO TUNE RX�CS (R) for 1 second. • After releasing, beeps sound, and the station call sign is an- nounced if the RX>CS Speech function is set to ON in the "SPEECH" Set mode. SET (C) > SPEECH > RX>CS SPEECH • If you want to select another call sign in the RX history, rotate [DIAL] while holding down AUTO TUNE RX�CS (R). NOTE: When a received signal is weak, or during DR mode scanning, the call sign may not be received correctly. In that case appears, an error beep sounds, and a quick reply call cannot be made. 2. Hold down [PTT] to transmit • While holding down [PTT], the TX/RX indicator lights red. NOTE: Push AUTO TUNE RX�CS (R) or DR (C), or touch "FROM" on the DR mode screen to cancel the Call Sign Capture mode, and return to the previous call sign setting. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) While receiving When receiving a call from "JG3LUK." While holding down AUTO TUNE RX�CS (R) Beeps JG3LUK AUTO TUNE RX�CS After releasing AUTO TUNE RX�CS (R) Appears after selecting a call sign. Transmitting 8-7