Icom IC-7100 Advanced Instructions - Page 81

Previous view 4 RECEIVE AND TRANSMIT The functions for RTTY operation (Continued) DDRTTY decode Set mode The RTTY decode Set mode is used to set the decode USOS function, RTTY decoder new line code and the TX USOS function. • Setting contents qqIn the RTTY mode, push MENU (C) one or more times to select the "M-2" screen (Menu M-2). wwTouch [DEC](D) to display the RTTY decoder screen. • Touch [WIDE](D) to toggle the decode screen size be- tween normal and wide. eeTouch [](D) to display the RTTY decoder (2) screen. • Touch [] or [](D) to toggle between the RTTY de- coder and the RTTY decode (2) screens. rrTouch [SET](D) to enter the "RTTY DECODE SET" screen. ttTouch the desired item to select. • See below for details of the set items and options. yyTouch the desired option or rotate the Dial to change the setting. • If desired, touch the item for 1 second to open the De- fault set window, then select the "Default" to reset to the default setting. uuTouch [](D) or push MENU (C) to return to the "KEYER" (Root) screen. iiPush MENU (C) to return to the "M-2" screen (Menu 2). The L, R, C or D in the instructions indicate the part of the controller. L: Left side, R: Right side, C: Center bottom D: Display (Touch screen) Touch [SET] Touch the item (Example: TX USOS) Touch the option (Example: OFF) Decode USOS (Default: ON) Turn the USOS (UnShift On Space) function ON or OFF. This function decodes a letter code after receiving a "space." • OFF: Decodes as a character code • ON: Decodes as a letter code Decode New Line (Default: CR,LF,CR+LF) Select the internal RTTY decoder new line code. CR: Carriage Return, LF: Line Feed • CR,LF,CR+LF:Makes a new line with any code. • CR+LF: Makes a new line with only the CR+LF code. TX USOS (Default: ON) Explicitly inserts the FIGS character, even though it is not required by the receiving station. • OFF: Inserts FIGS • ON: Does not insert FIGS 4-16