Icom IC-7100 Advanced Instructions - Page 366
Send/read the RX Call Sign Auto
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
Previous view 20 CONTROL COMMAND Remote jack (CI-V) information DDCommand table (Continued) Cmd. Sub cmd. 1A 05 0162 0163 0164 0165 0166 0167 0168 0169 0170 0171 0172 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 Data 00 to 15 0000 to 0255 0000 to 0255 00 to 20 0020 to 0130 00/01 00/01 00/01 00/01 00 to 03 00 to 02 00 to 02 00/01 00 to 02 00/01 00/01 00/01 00/01 00/01 00/01 00/01 0000 to 0255 00 to 02 00/01 Description Send/read NR level for the DR mode (00=0 to 15=15) Send/read the VOX gain (0000=0% to 0255=100%) Send/read the ANTI-VOX gain (0000=0% to 0255=100%) Send/read the VOX delay time (00=0.0 sec. to 20=2.0 sec.) Send/read the BK-IN delay time (0020=2.0d to 0130=13.0d) Send/read the recording mode (00=TX&RX, 01=RX Only) Send/read the squelch status for the RX voice audio recording (00=Always, 01=Squelch Auto) Send/read the QSO audio record file Split function setting (00=OFF, 01=ON) Send/read the PTT Automatic Recording function setting (00=OFF, 01=ON) Send/read the Skip Timer setting while playing back (00=3 sec., 01=5 sec., 02=10 sec., 03=30 sec.) Send/read the Standby Beep setting (00=OFF, 01=ON, 02=ON (to me:High Tone)) Send/read Auto Reply setting (00=OFF, 01=ON, 02=Voice) Send/read the DV Data TX setting (00=PTT, 01=Auto) Send/read the Digital Monitor setting (00=Auto, 01=Digital, 02=Analog) Send/read the Digital Repeater setting function setting (00=OFF, 01=ON) Send/read the RX Call Sign Auto Write setting (00=OFF, 01=Auto) Send/read the RX RPT Call Sign Auto Write setting (00=OFF, 01=Auto) Send/read the DV Auto Detect setting (00=OFF, 01=ON) Send/read the RX Record (RPT) setting (00=ALL, 01=Latest Only) Send/read the BK function setting (00=OFF, 01=ON) Send/read the EMR mode setting (00=OFF, 01=ON) Send/read EMR AF Level (0000=0% to 0255=100%) Send/read the external GPS receiver setting (00=OFF, 01=External GPS, 02=Manual) Send/read the GPS Receiver Baud setting (00=4800 bps, 01=9600 bps) Cmd. Sub cmd. 1A 05 0186 0187 0188 0189 0190 0191 0192 0193 0194 0195 0196 0197 0198 0199 0200 0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 Data Description see p. 20-13 Send/read the manually pro- grammed position 00/01 Send/read the GPS Indicator set- ting (00=OFF, 01=ON) 00/01 Send/read the Position Format setting (00=ddd˚mm.mm', 01=ddd˚mm'ss") 00/01 Send/read the Distance and Altitude unit (00=meter, 01=feet/mile) 00 to 02 Send/read the GPS speed unit (00=km/h, 01=mph, 02=knots) see p. 20-13 Send/read GPS alarm area (Group) 00 to 02 Send/read GPS alarm area (RX/Memory) (00=Limited, 01=Extended, 02=Both) 00 to 02 Send/read the GPS TX Mode setting (00=OFF, 01=GPS(DV-G), 02=GPS-A(DV-A)) 00/01 Send/read the GPS (RMC) Sentence setting (00=OFF, 01=ON) 00/01 Send/read the GPS (GGA) Sentence setting (00=OFF, 01=ON) 00/01 Send/read the GPS (GLL) Sentence setting (00=OFF, 01=ON) 00/01 Send/read the GPS (GSA) Sentence setting (00=OFF, 01=ON) 00/01 Send/read the GPS (VTG) Sentence setting (00=OFF, 01=ON) 00/01 Send/read the GPS (GSV) Sentence setting (00=OFF, 01=ON) see p. 20-14 Send/read the GPS Message see p. 20-13 Send/read the Unproto Address 00/01 Send/read the position data extension setting (00=OFF, 01=COURSE/SPEED) 00 to 02 Send/read the GPS-A Time Stamp setting (00=OFF, 01=DHM, 02=HMS) 00/01 Send/read the GPS-A altitude setting (00=OFF, 01=ON) 00 to 03 Send/read the GPS-A Symbol (00=No.1, 01=No.2, 02=No.3, 03=No.4) see p. 20-13 Send/read the GPS-A Symbol No.1 setting see p. 20-13 Send/read the GPS-A Symbol No.2 setting see p. 20-13 Send/read the GPS-A Symbol No.3 setting see p. 20-13 Send/read the GPS-A Symbol No.4 setting 00 to 42 Send/read the GPS-A SSID (00=---, 01=(-0), 02=-1 to 16=-15, 17=-A to 42=-Z) 20-9