Icom IC-7100 Advanced Instructions - Page 337
Time Set Set mode, GPS Time correct, UTC Offset, Clock Display
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Previous view 17 SET MODE Time Set Set mode DATE Time Set > Date/Time > DATE (DATE) Manually set the date. TIME Time Set > Date/Time > TIME (TIME) Manually set the time that is displayed on the right hand corner of the screen to between 0:00 and 23:59. The time is displayed in the 24 hour format. GPS Time correct (Default: Auto) Time Set > GPS Time Correct (GPS Time Correct) Select whether or not the time data is automatically corrected by a received GPS sentence. • OFF: The time data is not automatically corrected. • Auto: The time data is automatically corrected. UTC Offset (Default: ±0:00) Time Set > UTC Offset (UTC Offset) Set a time difference between UTC (Universal Time Coordinated) and the local time to between -14:00 and +14:00 in 00:05 steps. Clock Display (Default: Local) Time Set > Clock Display (Clock Display) Set a desired clock display mode. • Local: Displays the local time. • UTC: Displays the UTC (Universal Time Coordinat- ed). Auto Power OFF (Default: OFF) Time Set > Auto Power OFF (Auto Power OFF) This function automatically turns OFF the power after no operation has not been performed for the preprogrammed time. The "Auto Power OFF" pops up in 10 seconds before the transceiver automatically turns OFF, and a beep sounds. If an operation is made within the 10 seconds, the timer restarts. • OFF: Turns the function OFF. • 30 to 120 min: Select a desired Auto Power OFF time between 30, 60, 90 and 120 minutes. The power automatically turns OFF af- ter no operation is made for the speci- fied time period. NOTE: The auto power OFF timer activates each time the transceiver is turned ON. To deactivate the timer, select OFF. 17-30