Icom IC-7100 Advanced Instructions - Page 192
Duplex direction setting, Frequency offset programming
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Previous view 9 D-STAR OPERATION Repeater list programming (Continued) 9. Duplex direction setting • T his item appears only when "YES" is selected in '7. Access repeater setting.' • "DUP-" is automatically set when the access repeater frequency is programmed in '8. Access repeater frequency programming.' • If necessary, you can change the duplex direction. #4 Touch "DUP:." #5 Touch a desired duplex direction item. • OFF: Turn the duplex function OFF. For a simplex operation, this item MUST be set to "OFF." • DUP-:The transmit frequency shifts down from the receive frequency by the offset amount. • DUP+:The transmit frequency shifts up from the receive frequency by the offset amount. 10. Frequency offset programming • T his item appears only when "YES" is selected in '7. Access repeater setting.' • T he offset value* is automatically set when the access repeater frequency is programmed in '8. Access repeater frequency programming.' *The default value differs, depending on the version. • If necessary, you can change the frequency offset. #6 Touch [√](D). #7 Touch "OFFSET FREQ" to enter the frequency offset edit mode. • A cursor appears and blinks. #8 Touch the desired number to input the frequency offset. • T ouch [CE](D) to delete the selected number. • T ouch [](D) to move the cursor backwards, or touch [](D) to move the cursor forwards. *If desired, touch the frequency offset for 1 second to open the Function set window, and then touch the "Frequency Clear" to delete the frequency. #9 After entering, touch [ENT](D). Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) 9-35 Touch "DUP" Touch "DUP-" Touch "OFFSET FREQ" Example: "5.000.0" Touch [ENT] ☞ Continued on the next page.