Icom IC-7100 Advanced Instructions - Page 265
Inserting the SD card
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Previous view 13 USING AN SD CARD Inserting the SD card qqTurn OFF the transceiver. wwInsert the card into the slot until it locks in place, and makes a 'click' sound. • " " appears when the SD card is inserted. • " " and " " alternately blink while accessing the SD card. NOTE: Before inserting, be sure to check the card direction. If the card is forcibly or inversely inserted, it will damage the card and/or the slot. Front panel SD card Terminals facing down Cut corner side Appears DDFormatting the SD card • If you use a brand new SD card, format it, by doing the following steps. • Formatting a card erases all its data. Before formatting any programmed card, make a backup file onto your PC. qqTurn OFF the transceiver, and then insert the card into the slot. wwTurn ON the transceiver. • " " appears when the SD card is inserted. eePush SET(C) to enter the Set mode. rrTouch the "SD Card" Set mode. • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. ttTouch the "Format" item. • The confirmation screen "Format OK?" appears. yyTouch [YES](D). • T he formatting starts and the display shows the formatting progress. • After formatting ends, the display automatically returns to the screen displayed before touching [YES](D). Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) q q ˔w 13-4