Icom IC-7100 Advanced Instructions - Page 162
Message Transmission, TX Message, RX Message Display
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Previous view 9 D-STAR OPERATION Message operation (Continued) DDMessage Transmission You can transmit a preprogrammed text message by pushing [PTT] on the microphone. First, select a TX message which also turns ON the message transmission function. qqPush SET(C) to enter the Set mode. wwTouch the "TX Message" item of the "My Station" Set mode. My Station > TX Message • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch the number to select message memory num- ber 1 to 5. • T o turn OFF the message transmission function, select "OFF." rrPush SET(C) to exit the Set mode. • The message is transmitted along with your voice signal. • T he message is transmitted each time you push [PTT] on the microphone. • T he message is automatically transmitted every 30 sec- onds during continuous transmission. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Push SET Touch "My Station" RX message display function As the default, the received message is automatically displayed and scrolled on the LCD. To not display and scroll the received message, turn OFF the RX message display function in "RX Message Display" of the Set mode. (p. 17-27) SET(C) > Display > RX Message Display The received message is displayed and scrolled here. 9-5 Touch "TX Message" Touch "1:JAPAN > TOM" Push SET