Icom IC-7100 Advanced Instructions - Page 260
DR mode and a priority channel, Set the priority channel, Using the Memory/Call/Program Scan Edge
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Previous view 12 SCAN OPERATION DR mode and a priority channel Checks the selected priority channel every 5 seconds, while receiving a repeater in the DR mode. 1. Set the priority channel • Using the VFO frequency q Touch the Memory channel number indication once or twice to select the VFO mode. (p. 3-4) w Set the receive frequency and the operating mode. (p. 3-7, 3-17) • Using the Memory/Call/Program Scan Edge channel q Touch the Memory channel number indication once or twice to select the Memory mode. (p. 3-4) w Rotate [BANK] or [M-CH] (L) to set the priority channel. • Memory channel, Call channel or Program Scan Edge channel can be selected as the priority channel. 2. Select the repeater in the DR mode q Push DR (C) to select the DR mode. (p. 3-17) w Touch "FROM" (Access repeater), if "FROM" is not selected. e Rotate the Dial to select the desired repeater. • You can select a repeater in the "FROM SELECT" screen that is displayed after touching the repeater name on "FROM." 3. Start the Priority scan q Push QUICK (D) to open the Quick Menu window. w Touch "PRIO Watch ON" to start the Priority scan. • T he DR mode screen is automatically selected, and PRIO appears. • T o cancel the Priority scan, touch "PRIO Watch OFF" in the Quick Menu window. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) When the VFO frequency is set as the priority channel The receive frequency and the operating mode setting [BANK]/ [M-CH] Set the receive frequency in the VFO mode. DR Select the DR mode Select the repeater to receive (Example: Hirano43) Touch "PRIO Watch ON" 12-17 Appears while the priority scanning