Icom IC-7100 Advanced Instructions - Page 248

Previous view 12 SCAN OPERATION Scan Set mode (Continued) SCAN Speed (Default: Fast) Select the desired scan speed between slow and fast. • Slow: The scan is slower. • Fast: The scan is faster. SCAN Resume (Default: ON) Set the Scan Resume function ON or OFF. • OFF: When a signal is detected, the scan is cancelled. • ON: When a signal is received during a scan, the scan pauses for the set period of time in the "Pause Timer" setting, and then resumes. When the signal disappears, the scan resumes after the set period of time in the "Resume Timer" setting. Pause Timer (Default: 10 sec) Select the scan Pause Timer. When a signal is received, the scan pauses according to this setting. When the "SCAN Resume" is set to "OFF," this setting is invalid. • 2 to 20 sec: When a signal disappears while pausing the scan for 2 to 20 seconds (in 2 sec- onds steps), the scan resumes accord- ing to the setting in the Resume Timer. • Hold: When receiving a signal, the scan paus- es and resumes when it disappears, ac- cording to the setting in Resume Timer. Resume Timer (Default: 2sec) Select the scan Resume Timer. When a received signal disappears, the scan resumes according to this setting. When the "SCAN Resume" is set to "OFF," this setting is invalid. • 0 sec: The scan resumes immediately after the signal disappears. • 1 to 5 sec: The scan resumes 1 to 5 seconds after the signal disappears. • Hold: The scan remains paused according to the Pause Timer, even if the signal disap- pears. - Rotate the Dial to resume the scan. - W hen "Pause Timer" is set to 2 to 20 seconds, the scan resumes, according to the "Pause Timer" setting. MAIN DIAL (SCAN) (Default: Up/Down) Select the function of the Dial while scanning. • OFF : Rotating the Dial cancels the scan. • Up/Down : Rotating the Dial changes the scanning direction. 12-5