Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 174

Managed Switch CLI Manual, Release 8.0 0/2 Untrusted 10 10 show arp access-list Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL name as the argument will display on ly the rules in that ARP ACL. Format Mode show arp access-list [acl-name] • Privileged EXEC • User EXEC Example: The following shows example CLI display output for the command. (Switch) #show arp access-list ARP access list H2 permit ip host 1.1.1.1 mac host 00:01:02:03:04:05 permit ip host 1.1.1.2 mac host 00:03:04:05:06:07 ARP access list H3 ARP access list H4 permit ip host 2.1.1.2 mac host 00:03:04:05:06:08 IGMP Snooping Configuration Commands This section describes the commands you use to configure IGMP snooping. The software supports IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve bandwidth because it allows the switch to forward IP multicast traffic only to connected hosts that request multicast traffic. IGMPv3 adds source filtering capabilities to IGMP versions 1 and 2. set igmp This command enables IGMP Snooping on the system (Global Config Mode) or an interface (Interface Config Mode). This command also enables IGMP snooping on a particular VLAN (VLAN Config Mode) and can enable IGMP snooping on all interfaces participating in a VLAN. Switching Commands v1.0, July 2009 3-138