Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 442

Managed Switch CLI Manual, Release 8.0 aaa authentication login This command is used to set authentication at login. The default and optional list names that you create with the aaa authentication login command are used with the login authentication command. Create a list by entering the aaa authentication login list-name method command for a particular protocol, where list-name is any character string used to name this list. The method argument identifies the list of methods that the authentication algorithm tries, in the given sequence. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. For example if none is specified as an authentication method after radius, no authentication is used if the radius server is down. where: Format Mode aaa authentication login {default | list-name} method1 [method2...] Global Config Default Uses the listed authentication methods that follow this argument as the default list of methods when a user logs in. list-name Character string used to name the list of authentication methods activated when a user logs in. Up to 12 characters. method1 [method2...] At least one from the following table: Keyword enable line local none radius tacacs Description Uses the enable password for authentication. Uses the line password for authentication. Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS servers for authentication. Note: The local user database is checked. This has the same effect as the following command:aaa authentication login local Management Commands v1.0, July 2009 7-37