Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 364

Managed Switch CLI Manual, Release 8.0 option The option command configures DHCP Server options. The parameter specifies the DHCP option code and ranges from 1-254. The parameter specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. The hex parameter specifies hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c). Default Format Mode none option {ascii string | hex [...] | ip [...]} DHCP Pool Config no option This command removes the DHCP Server options. The parameter specifies the DHCP option code. Format Mode no option DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none ip dhcp excluded-address [highaddress] Global Config Utility Commands v1.0, July 2009 6-47