Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 463

Managed Switch CLI Manual, Release 8.0 Field ip addr dnsname Description The IP address of the RADIUS Authenticating server. The DNS name of the server. radius server retransmit This command configures the global parameter for the RADIUS client that specifies the number of transmissions of the messages to be made before attempting the fall back server upon unsuccessful communication with the current RADIUS authenticating server. When the maximum number of retries are exhausted for the RADIUS accounting server and no response is received, the client does not communicate with any other server. Default Format Mode 4 radius server retransmit Global Config Field retries Description The maximum number of transmission attempts in the range of 1 to 15. no radius server retransmit The no version of this command sets the value of this global parameter to the default value. Format Mode no radius server retransmit Global Config radius server timeout This command configures the global parameter for the RADIUS client that specifies the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30. Management Commands v1.0, July 2009 7-58