Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 33

Managed Switch CLI Manual, Release 8.0 Term Definition Switch Status The switch status. Possible values are OK, Unsupported, Code Mismatch, Config Mismatch, or Not Present. Switch Description The switch description. Expected Code Version The expected code version. Detected Code Version The version of code running on this switch. If the switch is not present and the data is from pre-configuration, then the code version is "None". Detected Code in The version of code that is currently stored in FLASH memory on the switch. This code Flash executes after the switch is reset. If the switch is not present and the data is from pre- configuration, then the code version is "None". Up Time The system up time. show supported switchtype This commands displays information about all supported switch types or a specific switch type. Format Mode show supported switchtype [] User EXEC Privileged EXEC If you do not supply a value for , the following output appears: Term Definition Switch Index (SID) The index into the database of supported switch types. This index is used when preconfiguring a member to be added to the stack. Model Identifier The model identifier for the supported switch type. Management Preference The management preference value of the switch type. Code Version The code load target identifier of the switch type. If you supply a value for , the following output appears: Term Switch Type Definition The 32-bit numeric switch type for the supported switch. Stacking Commands 2-9 v1.0, July 2009