Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 314

Managed Switch CLI Manual, Release 8.0 This command specified in Interface Config mode only affects a single interface, whereas the Global Config mode setting is applied to all interfaces. The vlan keyword is only valid in the Global Config mode. The Interface Config mode command is only available on platforms that support independent per-port class of service queue configuration. Note: You should be aware that the option may or may not be available, depending on the platform. Format Modes ipv6 traffic-filter [vlan ] [sequence ] • Global Config • Interface Config no ipv6 traffic-filter This command removes an IPv6 ACL identified by from the interface(s) in a given direction. Format Modes no ipv6 traffic-filter [vlan ] in [sequence ] • Global Config • Interface Config show ipv6 access-lists This command displays an IPv6 access list and all of the rules that are defined for the IPv6 ACL. Use the [name] parameter to identify a specific IPv6 ACL to display. Format Mode show ipv6 access-lists [name] Privileged EXEC Term Rule Number Action Definition The ordered rule number identifier defined within the IPv6 ACL. The action associated with each rule. The possible values are Permit or Deny. Quality of Service (QoS) Commands v1.0, July 2009 5-47