Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 70

Managed Switch CLI Manual, Release 8.0 vlan participation all This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid VLAN identification number. Format Mode vlan participation all {exclude | include | auto} Global Config You can use the following participation options: Participation Options include exclude auto Definition The interface is always a member of this VLAN. This is equivalent to registration fixed. The interface is never a member of this VLAN. This is equivalent to registration forbidden. The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this VLAN unless a join request is received on this interface. This is equivalent to registration normal. vlan port acceptframe all This command sets the frame acceptance mode for all interfaces. Default Format Mode all vlan port acceptframe all {vlanonly | all} Global Config The modes defined as follows: Mode Definition VLAN Only mode Untagged frames or priority frames received on this interface are discarded. Admit All mode Untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification. Switching Commands v1.0, July 2009 3-34