Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 182

Managed Switch CLI Manual, Release 8.0 When you specify a value for , the following information appears: Term Definition VLAN ID The VLAN ID. IGMP Snooping Indicates whether IGMP Snooping is active on the VLAN. Admin Mode Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the VLAN. Group Membership Interval The amount of time in seconds that a switch will wait for a report from a particular group on a particular interface, which is participating in the VLAN, before deleting the interface from the entry.This value may be configured. Maximum The amount of time the switch waits after it sends a query on an interface, participating in Response Time the VLAN, because it did not receive a report for a particular group on that interface. This value may be configured. Multicast Router Expiry Time The amount of time to wait before removing an interface that is participating in the VLAN from the list of interfaces with multicast routers attached. The interface is removed if a query is not received. This value may be configured. show igmpsnooping mrouter interface This command displays information about statically configured ports. Format Mode show igmpsnooping mrouter interface Privileged EXEC Term Interface Multicast Router Attached VLAN ID Definition The port on which multicast router information is being displayed. Indicates whether multicast router is statically enabled on the interface. The list of VLANs of which the interface is a member. show igmpsnooping mrouter vlan This command displays information about statically configured ports. Switching Commands v1.0, July 2009 3-146