Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 58

Managed Switch CLI Manual, Release 8.0 no spanning-tree bpduforwarding This command will cause the STP BPDU packets received from the network to be dropped if STP is disabled. Format Mode no spanning-tree bpduforwarding Global Config show spanning-tree This command displays spanning tree settings for the common and internal spanning tree. The following details are displayed. Format Mode show spanning-tree • Privileged EXEC • User EXEC Term Definition Bridge Priority Specifies the bridge priority for the Common and Internal Spanning tree (CST). The value lies between 0 and 61440. It is displayed in multiples of 4096. Bridge Identifier The bridge identifier for the CST. It is made up using the bridge priority and the base MAC address of the bridge. Time Since Topology Change Time in seconds. Topology Number of times changed. Change Count Topology Change Boolean value of the Topology Change parameter for the switch indicating if a topology change is in progress on any port assigned to the common and internal spanning tree. Designated Root The bridge identifier of the root bridge. It is made up from the bridge priority and the base MAC address of the bridge. Root Path Cost Value of the Root Path Cost parameter for the common and internal spanning tree. Root Port Identifier Identifier of the port to access the Designated Root for the CST Root Port Max Derived value. Age Switching Commands v1.0, July 2009 3-22