Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 89

Managed Switch CLI Manual, Release 8.0 Term Definition Name An optional name of the protected port group. The name can be up to 32 alphanumeric characters long, including blanks. The default is blank. List of Physical List of ports, which are configured as protected for the group identified with . If Ports no port is configured as protected for this group, this field is blank. show interfaces switchport This command displays the status of the interface (protected/unprotected) under the groupid. Format Mode show interfaces switchport • Privileged EXEC • User EXEC Term Name Protected port Definition A string associated with this group as a convenience. It can be up to 32 alphanumeric characters long, including blanks. The default is blank. This field is optional. Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group is a multiple groups then it shows TRUE in Group . Private Group Commands This section describes commands used to configure private group and view private group configuration information. Private group can be used to create a group of ports that can or can not share traffic to each others in the same VLAN group. The main application is to isolate a group of users from another without using VLAN. switchport private-group This command is used to assign one port or a range of ports to private group (or ). The ingress traffic from a port in private group can be forwarded to other ports either in the same private group or anyone in the same VLAN that are not in a private group. Switching Commands v1.0, July 2009 3-53