Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 353

Managed Switch CLI Manual, Release 8.0 Format Mode sntp unicast client poll-retry Global Config no sntp unicast client poll-retry This command will reset the poll retry for SNTP unicast clients to its default value. Format Mode no sntp unicast client poll-retry Global Config sntp server This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535. Format Mode sntp server [ [ []]] Global Config no sntp server This command deletes an server from the configured SNTP servers. Format Mode no sntp server remove Global Config clock timezone When using SNTP/NTP time servers to update the switch's clock, the time data received from the server is based on Coordinated Universal Time (UTC) which is the same as Greenwich Mean Time (GMT). This may not be the time zone in which the switch is located. Use the clock timezone command to configure a time zone specifying the number of hours and optionally the number of minutes difference from UTC. To set the switch clock to UTC, use the no form of the command. Format Mode Default clock timezone zone-name +/-hours-offset [+/-minutes-offset] Global Config no clock timezone Utility Commands v1.0, July 2009 6-36