Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 496

Managed Switch CLI Manual, Release 8.0 Table 8-35: CoS Log Message Component COS Message Cause cosCnfgrInitPhase3Process: Unable to The COS component was unable to apply apply saved config -- using factory defaults the saved configuration and has initialized to the factory default settings. Table 8-36: DiffServ Log Messages Component DiffServ DiffServ Message Cause diffserv.c 165: diffServRestore Failed to While attempting to clear the running reset DiffServ. Recommend resetting device configuration an error was encountered in removing the current settings. This may lead to an inconsistent state in the system and resetting is advised. Policy invalid for service intf: "policy name, intIfNum x, direction y The DiffServ policy definition is not compatible with the capabilities of the interface specified. Check the platform release notes for information on configuration limitations. Routing/IPv6 Routing Table 8-37: DHCP Relay Log Messages Component DHCP relay DHCP relay DHCP relay Message Cause REQUEST hops field more than config value The DHCP relay agent has processed a DHCP request whose HOPS field is larger than the maximum value allowed. The relay agent will not forward a message with a hop count greater than 4. Request's seconds field less than the config The DHCP relay agent has processed a value DHCP request whose SECS field is larger than the configured minimum wait time allowed. processDhcpPacket: invalid DHCP packet The DHCP relay agent has processed an type: %u\n invalid DHCP packet. Such packets are discarded by the relay agent. Log Messages v1.0, July 2009 8-17