Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 233

Managed Switch CLI Manual, Release 8.0 show isdp entry This command displays ISDP entries. If the device id is specified, then only entries for that device are shown. Format Mode show isdp entry {all | deviceid} Privileged EXEC Term Definition Device ID IP Addresses Platform Interface Port ID Hold Time Version Advertisement Version Capability The device ID associated with the neighbor which advertised the information. The IP address(es) associated with the neighbor. The hardware platform advertised by the neighbor. The interface (slot/port) on which the neighbor's advertisement was received. The port ID of the interface from which the neighbor sent the advertisement. The hold time advertised by the neighbor. The software version that the neighbor is running. The version of the advertisement packet received from the neighbor. ISDP Functional Capabilities advertised by the neighbor. show isdp neighbors This command displays the list of neighboring devices. Format Mode show isdp neighbors [ { | detail} ] Privileged EXEC Term Device ID IP Addresses Capability Platform Interface Definition The device ID associated with the neighbor which advertised the information. The IP addresses associated with the neighbor. ISDP functional capabilities advertised by the neighbor. The hardware platform advertised by the neighbor. The interface (unit/slot/port) on which the neighbor's advertisement was received. Switching Commands v1.0, July 2009 3-197