Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 62

Managed Switch CLI Manual, Release 8.0 Term Definition Transitions Into The number of times this interface has transitioned into loop inconsistent state. Loop Inconsistent State Transitions Out of Loop Inconsistent State The number of times this interface has transitioned out of loop inconsistent state. If you specify 0 (defined as the default CIST ID) as the , this command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The is the desired switch port. In this case, the following are displayed. Term Definition Port Identifier The port identifier for this port within the CST. Port Priority The priority of the port within the CST. Port Forwarding The forwarding state of the port within the CST. State Port Role The role of the specified interface within the CST. Auto-Calculate Indicates whether auto calculation for port path cost is enabled or not (disabled). Port Path Cost Port Path Cost The configured path cost for the specified interface. Auto-Calculate Indicates whether auto calculation for external port path cost is enabled. External Port Path Cost External Port Path Cost The cost to get to the root bridge of the CIST across the boundary of the region. This means that if the port is a boundary port for an MSTP region, then the external path cost is used. Designated Root Identifier of the designated root for this port within the CST. Root Path Cost The root path cost to the LAN by the port. Designated Bridge The bridge containing the designated port. Designated Port Port on the Designated Bridge that offers the lowest cost to the LAN. Identifier Switching Commands v1.0, July 2009 3-26