Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 254

Managed Switch CLI Manual, Release 8.0 Term Reject Routes Total Routes Definition Total number of reject routes installed by all protocols. Total number of routes in the routing table. The following shows example CLI display output for the command. (Switch) #show ip route summary Connected Routes 1 Static Routes 7 RIP Routes 0 BGP Routes 0 OSPF Routes 0 Intra Area Routes 0 Inter Area Routes 0 External Type-1 Routes 0 External Type-2 Routes 0 Reject Routes 2 Total routes 8 show ip route preferences This command displays detailed information about the route preferences. Route preferences are used in determining the best route. Lower router preference values are preferred over higher router preference values. A route with a preference of 255 cannot be used to forward traffic. Format Modes show ip route preferences • Privileged EXEC • User EXEC Term Local Static OSPF Intra OSPF Inter OSPF External RIP Definition The local route preference value. The static route preference value. The OSPF Intra route preference value. The OSPF Inter route preference value. The OSPF External route preference value. The RIP route preference value. Routing Commands v1.0, July 2009 4-19