Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 446

Managed Switch CLI Manual, Release 8.0 snmp-server This command sets the name and the physical location of the switch, and the organization responsible for the network. The range for , and is from 1 to 31 alphanumeric characters. Default Format Mode none snmp-server {sysname | location | contact } Global Config snmp-server community This command adds (and names) a new SNMP community. A community is a name associated with the switch and with a set of SNMP managers that manage it with a specified privileged level. The length of can be up to 16 case-sensitive characters. Note: Community names in the SNMP Community Table must be unique. When making multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. Default Format Mode • Public and private, which you can rename. • Default values for the remaining four community names are blank. snmp-server community Global Config no snmp-server community This command removes this community name from the table. The is the community name to be deleted. Format Mode no snmp-server community Global Config Management Commands v1.0, July 2009 7-41