Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 491

Managed Switch CLI Manual, Release 8.0 Table 8-21: Mac-based VLANs Log Messages Component Mac based VLANS Message vlanMacVlanChangeCallback: Failed to delete an entry Cause This appears when a dtl fails to delete an entry for an vlan delete notify event. Table 8-22: 802.1x Log Messages Component 802.1X 802.1X 802.1X 802.1X 802.1X 802.1X 802.1X 802.1X Message Cause function: Failed calling dot1xIssueCmd 802.1X message queue is full function: EAP message not received from RADIUS server did not send required EAP server message function: Out of System buffers 802.1X cannot process/transmit message due to lack of internal buffers function: could not set state to , intf xxx the port dot1xApplyConfigData: Unable to dot1x in driver dot1xSendRespToServer: dot1xRadiusAccessRequestSend failed Failed sending message to RADIUS server dot1xRadiusAcceptProcess: error calling Failed sending accounting start to RADIUS radiusAccountingStart, ifIndex=xxx server function: failed sending terminate cause, intf Failed sending accounting stop to RADIUS xxx server Table 8-23: IGMP Snooping Log Messages Component Message Cause IGMP Snooping function: osapiMessageSend failed IGMP Snooping message queue is full IGMP Snooping Failed to set global igmp snooping mode to Failed to set global IGMP Snooping mode xxx due to message queue being full IGMP Snooping Failed to set igmp snooping mode xxx for Failed to set interface IGMP Snooping mode interface yyy due to message queue being full IGMP Snooping Failed to set igmp mrouter mode xxx for interface yyy Failed to set interface multicast router mode due to IGMP Snooping message queue being full IGMP Snooping Failed to set igmp snooping mode xxx for Failed to set VLAN IGM Snooping mode due vlan yyy to message queue being full Log Messages v1.0, July 2009 8-12