Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 93

Managed Switch CLI Manual, Release 8.0 no set garp timer leave This command sets the GVRP leave time on all ports or a single port to the default and only has an effect when GVRP is enabled. Format Mode no set garp timer leave • Interface Config • Global Config set garp timer leaveall This command sets how frequently Leave All PDUs are generated. A Leave All PDU indicates that all registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The value applies per port and per GARP participation. The time may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10 seconds. You can use this command on all ports (Global Config mode) or a single port (Interface Config mode), and it only has an effect only when GVRP is enabled. Default Format Mode 1000 set garp timer leaveall • Interface Config • Global Config no set garp timer leaveall This command sets how frequently Leave All PDUs are generated the default and only has an effect when GVRP is enabled. Format Mode no set garp timer leaveall • Interface Config • Global Config show garp This command displays GARP information. Switching Commands v1.0, July 2009 3-57