Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 413

Managed Switch CLI Manual, Release 8.0 Management VLAN ID 1 Web Mode Enable Java Mode Enable Console Port Access Commands This section describes the commands you use to configure the console port. You can use a serial cable to connect a management host directly to the console port of the switch. configuration This command gives you access to the Global Config mode. From the Global Config mode, you can configure a variety of system settings, including user accounts. From the Global Config mode, you can enter other command modes, including Line Config mode. Format Mode configuration Privileged EXEC line This command gives you access to the Line Config mode, which allows you to configure various Telnet settings, ssh settings, and the console port. Format Mode line {console | telnet | ssh} Global Config serial baudrate This command specifies the communication rate of the terminal interface. The supported rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. Default Format Mode 9600 serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200} Line Config Management Commands 7-8 v1.0, July 2009