Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 32

Managed Switch CLI Manual, Release 8.0 show switch This command displays information about all units in the stack or a single unit when you specify the unit value. Format Mode show switch [] Privileged EXEC Term Switch Definition The unit identifier assigned to the switch. When you do not specify a value for , the following information appears: Term Definition Management Status Indicates whether the switch is the Primary Management Unit, a stack member, or the status is unassigned. Preconfigured Model Identifier The model identifier of a preconfigured switch ready to join the stack. The Model Identifier is a 32-character field assigned by the device manufacturer to identify the device. Plugged-In Model The model identifier of the switch in the stack. Model Identifier is a 32-character field Identifier assigned by the device manufacturer to identify the device. Switch Status The switch status. Possible values for this state are: OK, Unsup ported, Code Mismatch, Config Mismatch, or Not Present. Code Version The detected version of code on this switch. When you specify a value for , the following information appears: Term Management Status Hardware Management Preference Admin Management Preference Switch Type Model Identifier Definition Indicates whether the switch is the Primary Management Unit, a stack member, or the status is unassigned. The hardware management preference of the switch. The hardware management preference can be disabled or unassigned. The administrative management preference value assigned to the switch. This preference value indicates how likely the switch is to be chosen as the Primary Management Unit. The 32-bit numeric switch type. The model identifier for this switch. Model Identifier is a 32-character field assigned by the device manufacturer to identify the device. Stacking Commands 2-8 v1.0, July 2009