Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 346

Managed Switch CLI Manual, Release 8.0 Using the options described below, you can specify the number and size of Echo Requests and the interval between Echo Requests. Parameter count interval size Description Use the count parameter to specify the number of ping packets (ICMP Echo requests) that are sent to the destination address specified by the field. The range for is 1 to 15 requests. Use the interval parameter to specify the time between Echo Requests, in seconds. Range is 1 to 60 seconds. Use the size parameter to specify the size, in bytes, of the payload of the Echo Requests sent. Range is 0 to 65507 bytes. The following are examples of the CLI command. ping success: (Switch) #ping 10.254.2.160 count 3 interval 1 size 255 Pinging 10.254.2.160 with 255 bytes of data: Received response for icmp_seq = 0. time= 275268 usec Received response for icmp_seq = 1. time= 274009 usec Received response for icmp_seq = 2. time= 279459 usec ----10.254.2.160 PING statistics---3 packets transmitted, 3 packets received, 0% packet loss round-trip (msec) min/avg/max = 274/279/276 ping failure: In Case of Unreachable Destination: (Switch) # ping 192.168.254.222 count 3 interval 1 size 255 Pinging 192.168.254.222 with 255 bytes of data: Received Response: Unreachable Destination Received Response :Unreachable Destination Received Response :Unreachable Destination ----192.168.254.222 PING statistics---3 packets transmitted,3 packets received, 0% packet loss round-trip (msec) min/avg/max = 0/0/0 In Case Of Request TimedOut: (Switch) # ping 1.1.1.1 count 1 interval 3 Pinging 1.1.1.1 with 0 bytes of data: ----1.1.1.1 PING statistics---- Utility Commands v1.0, July 2009 6-29