Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 472

Managed Switch CLI Manual, Release 8.0 Timeouts 0 Unknown Types 0 Packets Dropped 0 TACACS+ Commands TACACS+ provides access control for networked devices via one or more centralized servers. Similar to RADIUS, this protocol simplifies authentication by making use of a single database that can be shared by many clients on a large network. TACACS+ is based on the TACACS protocol (described in RFC1492) but additionally provides for separate authentication, authorization, and accounting services. The original protocol was UDP based with messages passed in clear text over the network; TACACS+ uses TCP to ensure reliable delivery and a shared key configured on the client and daemon server to encrypt all messages. tacacs-server host Use the tacacs-server host command in Global Configuration mode to configure a TACACS+ server. This command enters into the TACACS+ configuration mode. The parameter is the IP address or hostname of the TACACS+ server. To specify multiple hosts, multiple tacacs-server host commands can be used. Format Mode tacacs-server host Global Config no tacacs-server host Use the no tacacs-server host command to delete the specified hostname or IP address. The parameter is the IP address of the TACACS+ server. Format Mode no tacacs-server host Global Config Management Commands v1.0, July 2009 7-67