Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 280

Managed Switch CLI Manual, Release 8.0 Note: • The parameters and can not be the same. • Only one other class may be referenced by a class. • Any attempts to delete the class while the class is still referenced by any fails. • The combined match criteria of and must be an allowed combination based on the class type. • Any subsequent changes to the class match criteria must maintain this validity, or the change attempt fails. • The total number of class rules formed by the complete reference class chain (including both predecessor and successor classes) must not exceed a platform-specific maximum. In some cases, each removal of a refclass rule reduces the maximum number of available rules in the class definition by one. no match class-map This command removes from the specified class definition the set of match conditions defined for another class. The is the name of an existing DiffServ class whose match conditions are being referenced by the specified class definition. Format Mode no match class-map Class-Map Config Ipv6-Class-Map Config match cos This command adds to the specified class definition a match condition for the Class of Service value (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet). The value may be from 0 to 7. Default Format Mode none match cos Class-Map Config Ipv6-Class-Map Config Quality of Service (QoS) Commands v1.0, July 2009 5-13